Tool Belts

These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip™ bag mouth. The leather FatLip™ keeps the bag formed, open, and protected against abrasion.Specifications:Pockets & Tool Holders: 13Weight: 1.9 lbs.Main Tool Bag: 10" x 10"Outer Bag: 6.5" x 5.5"Not available in left hand model.Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...

Great addition to your tool belt for extra lower back support. Will fit under a third bag or hammer holder!Very comfortable and supportive, high density foam pad with a polyethylene stiffener covered in industrial nylon.Made in the USA

High density neoprene cushion eliminates Tool Belt chafing and evenly distributes weight and pressure. Occidental Leather has taken the belt technology from their most comfortable Adjust-to-Fit systems and made it available for all belt worn belt systems.Light weight and easy to retrofit onto your existing belt set.Does not accommodate the following bags: B5611 and 5525 (found on the Black Builder and Big Oxy sets)

A case designed strictly for tool organization! Equipped with 2, 2003 - Oxy Tool Shield™, 18 pockets and tool holders total. Leather lined inside all along the bottom. Four interior walls. Ideal for the master finish carpenter or plant engineers!Specifications:Pockets & Tool Holders: 18Weight: 1.7 lbs.Main Bag: 9" x 8"Outer Bag: 5.5" x 5.5"Not available in left hand model. ...

Cost efficient fastener management! Single clip-on bags make it easy to switch to different applications. Keep them fully loaded and neatly lined up in your truck or clipped to your toolbox when not in use. Also can be used to add fastener storage or sub divide existing main bags.The Clip-On only fits up to a 2 inch WorkbeltSpecifications:Dimensions: 5" x 4.5" Weight: 0.3 lbs. Made in the USA ...

One extra bag not enough? Get the double clip-on pouch with leather clip-on patch for cell phone, etc. Cost efficient fastener management! Keep them fully loaded and neatly lined up in your truck or clipped to your toolbox when not in use. Also can be used to add fastener storage or sub divide existing main bags.The Clip-On only fits up to a 2 inch WorkbeltSpecifications:Main Bag: 5" x 7" Outer Bag: 5" x 5.5" Weight: 0.5 lbs. Made in the USA ...

Cost efficient fastener management with an angle square holster! Single clip-on larger capacity bag. Perfect for small jobs or the do it yourself weekend projects.Specifications:Main Bag: 7.5" x 6" Weight: 0.4 lbs. Made in USA!

Cost efficient fastener and tool management! Versatile multi pouch design, with tool holders for pencils, utility knife, angle square, and capacity for multiple fasteners. Perfect for small jobs or the do it yourself weekend projects.Specifications:Pockets & Tool Holders: 7 Main Bag: 7.5" x 6" Outer Bags: 5" x 5.5" Weight: 0.7 lbs.

Cost efficient fastener management! Single clip-on bags make it easy to switch to different applications. Keep them fully loaded and neatly lined up in your truck or clipped to your toolbox when not in use. Slightly deeper and narrower than the 9501. The Clip-On only fits up to a 2 inch Workbelt Specifications: Dimensions: 5"w x 6"h x 3"d Weight: 0.25 lbs. Made in the USA ...

( The Tools shown are for Sizing and capacity only, none of these tools are included )Occidental's Task Pouch provides holders for your tape measure, spiral pad, pens and pencils, screw driver, utility knife, and pliers. Accepts a 2" work belt. Made in the USA of our industrial 2-ply Cordura fabric with a foam core.Specifications:Dimensions: 5" x 5" Weight: 0.4 lbs. Made in the USA

Classic framing bags (B8017DB tool bag and the B8064 fastener bag) attached to the most comfortable tool belt made. This unique belt adjusts to fit seasonal size changes from 32" to 41". Features the removable High Mount Hammer Holder (5059) on rear. Constructed of rugged commercial nylon and high-density neoprene padding with extra wide hip areas. Employs a unique nylon cross over system that provides an “adjust to fit” feature that locks into place. A fully adjustable tool belt which...

Compact light weight bag design is ideal for trim, framing and finish work. Innovative, round-bottom nylon main and outer bags.Holders include a speed square inside or out and, features the patented* 2-in-1 outer bag for maximum fastener capacity in a compact space. Comes stock with the 2003 - Oxy Tool Shield™.Specifications:Pockets & Tool Holders: 11Weight: 1.0 lbs.Main Bag: 9.5" x 7.5"Outer Bag: 9" x 6"Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail...

Compact bag design is ideal for trim, light framing and finish work. Innovative, round-bottom, full capacity, two-ply foam core main and outer bags hold their shape empty or loaded. Clip on leather tab for tape or upper bag, driver bit or nail set pouches included, metal hammer holder. Comes stock with the 2003 - Oxy Tool Shield™.Specifications:Pockets & Tool Holders: 12Weight: 1.0 lbs.Main Bag: 9.5" x 7.5"Outer Bag: 6.5" x 5.5"Left handed model available as 9521LHTool Bags hold the tools most...

Just a hair’s-breadth under 4 pounds unloaded! Compact bag design is ideal for trim, light framing and finish work. Innovative, round-bottom, full capacity, two-ply foam core main and outer bags hold their shape empty or loaded and it’s adjustable! Adjusts from small to xl in seconds!• Left side fastener bag holsters a speed square and features patented* Oxy Dual Bag™ outer bags providing multiple fastener capacity in a compact space.• Right side tool bag features holders for most commonly...

Top of the line all leather bag Adjust-to-Fit™ set for the commercial electrician provides a full range of adjustment from pant waist size 32" to 40". Efficient, hand specific tool and fastener organization, function engineered. The leather NoSpill&Trade; tool holders form to your tools and give years of durable service. For the journeyman that requires the highest quality available.Tools Shown in Picture are not included.

Pro Leather™ construction bolt bag with bull-pin loop on each side. Tunnel loop on back accepts up to 3" work belt.Specifications:Pockets & Tool Holders: 3Weight: 1.3 lbs.Main Bag: 9" x 8.5"

Handcrafted all leather shoulder strap. Compliments our IronMouth™ carry bags and then some. Great for the seasoned traveler who wants an heirloom quality shoulder strap.Features adjustable shoulder pad and high quality swivel steel clips for ease of removal and movement. Detaches in seconds for storage inside your gear.Hand crafted from Bridle leather.1" wide strap adjusts from 45" long to 57.5" longMade in the USA

One of the most popular tool bags features double outer bags and holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax

( The Tools shown are for Sizing and capacity only, none of these tools are included )Compact 4 pocket tool organizer fits in your pocket protecting you, your tools, and your clothes. Ideal for small repair work, shop workers, gardeners, farm repair, and cabinetmakers. Create an instant mini tool carrier, organizing pliers, screwdrivers, and other tools while keeping them within easy reach. Handy snap loop hooks around up to a 2" belt, if desired. Specifications: Pockets & Tool Holders: 4...

All-leather belt worn case with snap closure protects and securely holds your calculator. Fits up to a 3" belt.Fits Construction Master models I, II, III, IV, and other brandsSpecifications:Also Available as Clip-On Model b6568 Dimension: 3.5" x 5.5" x 1.25" Weight: 0.3 lbs. Made in the USA

Classic black all leather fastener bag! Offers side by side 35' tape holster and an upper bag; external sleeve pockets, drill bit holsters, angle square holster. Internal, 2003 - Oxy Tool Shield (included). Main bag features reinforced back wall at stress points to insure years of durable wear.

Classic black all leather tool bag! Offers external leather hammer holder, double outer bags; internal storage includes one 2003 - Oxy Tool Shield , pockets for level, chisel, drill bits, knife, pencils and lumber crayon. Main bags feature reinforced back wall at stress points to insure years of durable wear.

The best of both worlds! Light weight leather bags in classic black! Main bags feature reinforced back wall at stress points to insure years of durable wear. Set includes the benchmark heavy duty leather framing belt; a 5020 2-in-1 Tool and Hammer holster.B5611 Left side fastener bag offers side by side 35' tape holster and an upper bag; external sleeve pockets, drill bit holsters, angle square holster and one internal 2003 - Oxy Tool Shield. . B5612 Right side tool bag offers external leather...

All-leather clip-on case with snap closure protects and securely holds your calculator.Fits Construction Master models I, II, III, IV, and other brandsSpecifications:Also Available as Belt Worn Model b5068 Dimension: 3.5" x 5.5" x 1.25" Weight: 0.3 lbs. Made in the USA

This tool bag features holders for pencils, work knife, chisel, level, lumber crayon, plus a heavy duty hammer loop. Main tool bag corners are reinforced with our trademark OxyRed™ leather.Specifications:Pockets & Tool Holders: 10Weight: 1.3 lbs.Main Tool Bag: 9" x 8"Outer Bag: 5" x 5.5"Also available for left hand builders as B8017DBLHTool Bags hold the tools most often accessed with the right hand and are worn on the right side of the body.Made in USA! ...

Three pouch nylon/leather combo bag featuring 11 pockets and tool holders. The double outer bags give you more room for organization. Main bag - 10"W x 8"D. Outer bag - 6"W x 5"D.

Three pouch nylon/leather combo bag features 9 pockets & tool holders. Main bag - 10"W X 8"D. Outer bag - 7"W X 51/2"D. Upper bag - 51/2"W X 4"D. Highly recommended for framing and general carpentry applications.

Unique patented* 2-in-1 outer bag with angle square holster between main and outer bag, 4 bags total. Also has a tri-square sleeve, cat’s paw loop and external nail set or driver bit pouches.Specifications:Pockets & Tool Holders: 10Weight: 1.7 lbs.Main Bag: 9" x 8"Outer Bag: 8" x 6"Upper Bag: 4.5" x 4.5"Also available for left hand builders as B8064LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square,...

Straightforward compact bag ideal as that third bag or for small jobs. Single pouch design with padded, double wall Industrial Nylon construction.Specifications:Weight: 0.4 lbs.Main Bag: 8" x 9"Made in the USA

The most comfortable belt we make featuring our Green Building™ black leather framing bags (B5611 fastener and B5612 tool bag). Corners are reinforced with our trademark Oxy Red™ Leather.This system provides a full range of adjustment from pant waist size 32” to 41”. Belt section is based upon our original design. utilizing high density neoprene, rugged commercial nylon, and leather components. Features a removable High Mount Hammer Holder (5059) on rear and is equipped with 2 of our 2003 -...

1” wide leather loop supports a safety release snap. Great for saw keys, wrench, etc.Position your most frequently used tools within easy reach. Made in the USA

New seven bag addition to our OxyLights™ tool belt line. A high performance combination of the B8017DB tool bag and the new B8064 fastener bag featuring the patented* 2-in-1 outer pouch for more compact multi pouch design.Leather and industrial nylon intelligently combined to lighten the builder’s load. The trademark OxyRed™ leather reinforces the main bag corners as well as provides our NoSpill™ system of all leather tool holders. Our most popular designs in a lighter weight alternative. ...

Occidental Leather 8382 - Stronghold Rough Framer Tool Bag Lightweight all nylon two pouch tool bag with leather reinforced corners. Leather sleeve for clip-on tape or upper bag. Includes metal hammer holder. Specifications: Pockets & Tool Holders: 11Weight: 1.3 lbs.Main Bag: 8" x 8"Outer Bag: 5.5" x 6"Not available in left hand model. Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body....

Strong, hard working, and light weight! Nylon and leather combined to give the ultimate in performance in a cost effective comfortable design suited for simple carpentry and rough framing. Tool holders for common tools with a back bag that accepts a speed square.

A new, unique design for production carpenters. These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip bag mouth. The leather FatLip keeps the bag formed, open, and protected against abrasion. (tools shown in picture are not included)

A new, unique design for production carpenters. These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip bag mouth. The leather FatLip keeps the bag formed, open, and protected against abrasion. (tools shown in picture are not included)

Leather and synthetics intelligently combined. These industrial nylon bags lighten the Professional Carpenter's load while providing the best of both worlds with all leather tool holders. Benchmark style and design with less weight. The Oxy Lights™ Pro Framer™ features the No Spill™ system and the same hand-specific tool holder design as our traditional all-leather systems. Bag corners are reinforced with trademark Red Hiker leather.

Create your own beltless system. Go "Beltless" with any bags that accept a 3" belt. This set allows the use of any of Occidental's traditional bags to suit your custom needs.Includes the 5592 - Beltless Retro Tab and 5055 Suspenders *D-Ring is Not To Be Used As A Safety Connection!**The big & tall builder (over 6 2") may need the Suspender Extension kit #5044 for proper fit. ...

Waterproof, Restore & Protect your Leather Tool Bags. Increase Leather Life.This dressing coats and penetrates the fibers to inhibit oxidation, and maintains a desirable level of lubrication in the leather, allowing the fibers to bend and move for longer life.The cream is chemically neutral, carrying no salts or harsh solvents.

Extremely comfortable padded and contoured yoke relieves hips and lower back strain. This design keeps straps from wandering off your shoulders and distributes weight evenly. Yoke is lined with a special material that wicks away moisture. The leather loop attachment system for up to a 3" belt is included. Easy on & off, just release the adjustable chest strap and hang up your whole rig with the heavy duty “D” ring* provided in center of yoke. Even Load Distribution Exceptional Comfort Pockets...

All leather heavy duty angled body holster for increased balance and comfort with 2 holders for drill or driver bits.Fits most cordless drills.Specifications:Pockets & Tool Holders: 3 Weight: 0.6 lbs. Also available for left handed builders as 5066LH Made in the USA

All leather hammer/tool holder with a long sleeve design to prevent tools and handles from swinging and "knee-capping". Also accommodates hammer tackers and flat bars up to 1 ⅝" diameter. Accepts up to a 3" wide belt.Made in the USA

hand crafted clip-on leather phone holster fits fits iPhone 6,7,8,X, Galaxy S6,S7,S9 (not Plus models). Also fit most other phones (refer to pocket size).A holster with heavy duty elastic sides that firmly holds your cell phone. Features heavy duty 2" spring steel belt clip plus secure Velcro closure.Made in the USA

Classic leather framing bags (5060 fastener bag and 5017DB tool bag). Features a removable High Mount Hammer Holder (5059) on rear. Constructed of rugged commercial nylon and high-density neoprene padding with extra wide hip areas. Employs a unique nylon cross over system that provides an adjust to fit feature that locks into place. A fully adjustable tool belt which provides one belt for all seasons and provides a full range of adjustment. Fixed bags don’t slip around.

The Occidental Leather 9855 is a comfortable belt for production carpenters featuring our Fat Lip™ Bag Design - Ten inch deep industrial nylon bags with leather-reinforced bottom and corners. Features multiple tool holders and a 5020 2-in-1 Tool & Hammer Holder in the rear. The right bag includes a 2003 tool shield. The adjust-To-Fit™ system provides a full range of adjustment from pant waist size 32" to 41". Belt section is based upon our original leather buscadero design, but utilizing high...

Chicago Brand, Left Handed Digital Calipers offer the easiest reading, gearless (chip resistant), English and Metric measurements. Measurements to .0005" / .01mm, with depth bar, and scale on bar. Hardened measurement surfaces, lockable jaws, storage case and a spare battery assure long and productive life. Instant conversion calculator with English/Metric button.

Made for Left Handed people.      For more than 30 years, the Pro Framer has been the benchmark by which all other tool belts have been measured. Designed by and for the professional builder, this traditional belt set is fine tuned for optimum efficiency and comfort. The Pro Leather Series is constructed of premium top grain cow hides tanned to our stringent specifications with a special blend of oils and waxes that meet the demands of heavy outdoor use. (Tools shown in...

This is a tool belt system for Left Handed people. For more than 30 years, the Pro Framer™ has been the benchmark by which all other tool belts have been measured. Designed by and for the professional builder, this traditional belt set is fine tuned for optimum efficiency and comfort. The Pro Leather Series is constructed of premium top grain cow hides tanned to stringent specifications with a special blend of oils and waxes that meet the demands of heavy outdoor use. ...