Occidental Leather Tool Belts

Large, innovative, round bottom design provides room for tool holders and fasteners! Holders for tri-square, cat’s paw, driver bits, angle square, tape pocket fits up to a 35’ tape. Comes stock with the very best in protection for tools, bags, and body; the 2003 - Oxy Tool Shield™.Specifications:Pockets & Tool Holders: 10Weight: 2.5 lbs.Main Bag: 11" x 9"Outer Bag: 8.5" x 6"Upper Bag: 4.5" x 4.5"Not available in left hand model.Fastener Bags hold the tools and fasteners most often accessed...

Compact design is ideal for trim and finish work but also suitable for light framing. Holders for 2 nail sets or driver bits, 1” blade square, cat’s paw sleeve. Angle square holster not included.Specifications:Pockets & Tool Holders: 8Weight: 1.5 lbs.Main Bag: 8" x 7.5"Outer Bag: 6" x 5"Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.Made in the USA ...

The most popular tool bag design with all the features of the 5018DB without an extra outer pouch and tape pocket. Holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer.Specifications:Pockets & Tool Holders: 9Weight: 1.7 lbs.Main Bag: 9" x 8"Outer Bag: 5.5" x 5.5"Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...

Double outer bags and holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer.Specifications:Pockets & Tool Holders: 10Weight: 1.9 lbs.Main Bag: 9" x 8"Outer Bag: 5" x 5.5"Also available for left hand builders as 5017DBLHTool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...

most popular tool bag features holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax®.Specifications:Pockets & Tool Holders: 10Weight: 1.8 lbs.Main Bag: 9" x 8"Outer Bag: 5" x 5.5"Available for left hand builders with double outer bags 5018DBLHTool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body. ...

One of the most popular tool bags features double outer bags and holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax

Compact design is ideal for trim and finish work, but also suitable for light framing. Holders inside for pencil, work knife, lumber crayon, and chisel. Exterior tool snap clip and heavy duty hammer loop.Specifications:Pockets & Tool Holders: 9Weight: 1.4 lbs.Main Tool Bag: 8" x 7.5"Outer Bag: 6" x 5.5"Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...

Large, innovative, round bottom design provides room for tool holders and fasteners! Holders for torpedo level, pencils, utility knife, chisels, driver bits, etc. Comes stock with the 2003 - Oxy Tool Shield™.Specifications:Pockets & Tool Holders: 16Weight: 2.4 lbs.Main Bag: 10" x 9"Outer Bag: 5" x 5.5"Not available in left hand model.Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made...

Includes loop for flashlight, chain for electrical tape, quick release tool snap, heavy duty hammer holder, pockets for screw drivers and specialized tools. Tunnel loop on back accepts up to 3" work belt.Specifications:Pockets & Tool Holders: 15Weight: 1.2 lbs.Main Bag: 6.5" x 6"Made in the USA

An all leather multi tool holder for Professional Electricians and Telecommunication specialists. Function engineered to provide superior organization and holders for specialty tools.14 pockets and tool holders plus a chain for tape and a quick release tool snap for keys, special wrenches, etc. There is a separate sleeve pocket in rear for wire ties etc.Specifications:Pockets & Tool Holders: 14 Weight: 1.0 lbs. Main Tool Bag: 6" x 6" Tool Bags hold the tools and fasteners most often accessed...

Large style, all leather pouch. Suitable for both lathers and drywall pros. Exceptional tool organization and durability. Holders for circle cutter, metal snips, saw, knife, Surform®, pencils.Specifications:Pockets & Tool Holders: 11Weight: 1.4 lbs.Main Bag: 8" x 6"Tool Bags hold the tools and fasteners most often accessed with the right hand and are worn on the right side of the body.Made in USA!

This high quality, 8-oz. top grain leather case is truly a work of industrial art! Features internal and external tool organization with 17 pockets and tool holders.Case is divided inside for maximum organization and holds the screwdrivers, markers, strippers, pliers, utility knife, chisels, torpedo level, hammer. Comes with quick release tool snap, strap for electrical tape. Also holster for 35’ 1” blade tape.Specifications:Pockets & Tool Holders: 17Weight: 2.1 lbs.Main Bag: 11" x 7"Made in...

All leather belt worn commercial electricians case with 25 pockets and tool holders that accommodate all your tools. Includes heavy duty chain for electrical tape and a handy utility clip. Designed exclusively for use by journeyman electricians. Black leather tool holders.Specifications:Pockets & Tool Holders: 25Weight: 2.0 lbs.Main Bag: 8" x 6.75" x 2.75"Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right...

Pro Leather™ construction bolt bag with bull-pin loop on each side. Tunnel loop on back accepts up to 3" work belt.Specifications:Pockets & Tool Holders: 3Weight: 1.3 lbs.Main Bag: 9" x 8.5"

Three pouch nylon/leather combo bag features 9 pockets & tool holders. Main bag - 10"W X 8"D. Outer bag - 7"W X 51/2"D. Upper bag - 51/2"W X 4"D. Highly recommended for framing and general carpentry applications.

Specifications:Pockets & Tool Holders: 10Weight: 1.3 lbs.Main Bag: 9" x 8"Middle Bag: 8" x 6"Outer Bag: 5.5" x 5.5"Upper Bag: 4.5" x 4.5"Also available for left hand builders as 8062LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.Made in the USA ...

A quality ranger style 3” work belt. Equipped with a 2” wide heavy leather tongue and a nickel plated steel roller buckle. Constructed entirely of the highest quality 12-14 oz. bridle leather to provide support and comfort. Edge stitched for quality, appearance and strength. ...

xtremely Comfortable 3” wide padded Industrial nylon work belt with a heavy 2” leather tongue and nickel plated steel roller buckle.To size your tool belt, place your existing tool belt on an even surface and measure it from the end of the buckle to the most commonly used hole. Select the belt size (by mid range) that is closest to your measurement.If you do not have a current tool belt to measure, you can get an approximate mid range measurement by adding 4" to your pant waist size.SizeMid...

Handcrafted all leather shoulder strap. Compliments our IronMouth™ carry bags and then some. Great for the seasoned traveler who wants an heirloom quality shoulder strap.Features adjustable shoulder pad and high quality swivel steel clips for ease of removal and movement. Detaches in seconds for storage inside your gear.Hand crafted from Bridle leather.1" wide strap adjusts from 45" long to 57.5" longMade in the USA

Unique patented* 2-in-1 outer bag with angle square holster between main and outer bag, 4 bags total. Also has a tri-square sleeve, cat’s paw loop and external nail set or driver bit pouches.Specifications:Pockets & Tool Holders: 10Weight: 1.7 lbs.Main Bag: 9" x 8"Outer Bag: 8" x 6"Upper Bag: 4.5" x 4.5"Also available for left hand builders as B8064LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square,...

These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip™ bag mouth. The leather FatLip™ keeps the bag formed, open, and protected against abrasion.Unique patented* 2-in-1 outer bag with angle square holster between main and outer bag, 4 bags total. Also has a tri-square sleeve, cat’s paw loop and external nail set or driver bit pouches.Specifications:Pockets & Tool Holders: 10Weight: 1.7 lbs.Main Bag: 10" x 10"Outer Bag: 9" x 6"Upper Bag: 5" x 4.5"Not...

These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip™ bag mouth. The leather FatLip™ keeps the bag formed, open, and protected against abrasion.Unique patented* 2-in-1 outer bag with angle square holster between main and outer bag, 4 bags total. Also has a tri-square sleeve, cat’s paw loop and external nail set or driver bit pouches.Specifications:Pockets & Tool Holders: 10Weight: 1.7 lbs.Main Bag: 10" x 10"Outer Bag: 9" x 6"Upper Bag: 5" x 4.5"Not...

Compact light weight bag design is ideal for trim, framing and finish work. Innovative, round-bottom nylon main and outer bags.Holders include a speed square inside or out and, features the patented* 2-in-1 outer bag for maximum fastener capacity in a compact space. Comes stock with the 2003 - Oxy Tool Shield™.Specifications:Pockets & Tool Holders: 11Weight: 1.0 lbs.Main Bag: 9.5" x 7.5"Outer Bag: 9" x 6"Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail...

Oxy Lights™ tool bag with holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer.Specifications:Pockets & Tool Holders: 9Weight: 1.2 lbs.Main Bag: 9" x 8"Outer Bag: 6.5" x 5.5"Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA