Occidental Leather Tool Belts

Specifically designed to accommodate most pliers and side cutters. Ideal for Felco and other pruning shears.Specifications:Dimensions: 2.75" x 5.5" Weight: 0.3 lbs. Made in the USA

( The Tools shown are for Sizing and capacity only, none of these tools are included )Occidental's Task Pouch provides holders for your tape measure, spiral pad, pens and pencils, screw driver, utility knife, and pliers. Accepts a 2" work belt. Made in the USA of our industrial 2-ply Cordura fabric with a foam core.Specifications:Dimensions: 5" x 5" Weight: 0.4 lbs. Made in the USA

( The Tools shown are for Sizing and capacity only, none of these tools are included )Ideal for estimating, troubleshooting, trim out, and more. This all-leather Pocket Caddy™ was created specifically for the electrical professional.Includes a pocket suitable for most compact testers. Total of 5 pockets and tool holders. Handy snap loop hooks around up to a 2" belt, if desired.Made in the USA

Insert in any tool pocket for extra protection and smooth access.This 2" x 6" polypropylene shield helps protect your bags from sharp tools. Order extras to outfit your vest or tool bags.

This leather holster Holds offset metal snips such as Wiss M6 or M7 and similar models used for steel framing also accommodates pruning shears. Ideal for use with 2003 Oxy™ Tool Shield. Belt Worn product accepts up to a 3” wide belt

All-leather belt worn case with snap closure protects and securely holds your calculator. Fits up to a 3" belt.Fits Construction Master models I, II, III, IV, and other brandsSpecifications:Also Available as Clip-On Model b6568 Dimension: 3.5" x 5.5" x 1.25" Weight: 0.3 lbs. Made in the USA

All leather compact pouch. No tool holders. Great for that third bag in the back.Specifications:Weight: 0.7 lbs.Main Bag: 7.5" x 8"Made in the USA

Two pouch all leather bag without internal tool holders. For those who need a straight forward serviceable utility bag.Specifications:Weight: 1.3 lbs.Main Bag: 9" x 8"Outer Bag: 5.5" x 5.5"Made in the USA

Occidentals largest all leather bag. For those who need an extra large deep bag without tool holders. Specifications: Weight: 1.7 lbs.Main Bag: 10" x 10" Made in the USA

Straightforward compact bag ideal as that third bag or for small jobs. Single pouch design with padded, double wall Industrial Nylon construction.Specifications:Weight: 0.4 lbs.Main Bag: 8" x 9"Made in the USA

An industrial work of art complemented by a rugged leather luggage handle for carrying comfort.This tool carrier features divided inside compartments with 16 screwdriver loops, 9 center compartments, 6 outside pockets, 6 outside tool loops plus a snap clip and a location strap for clip-on items 9501 bag included.Upright design keeps tools standing for easy identification and access. Steel Dee hardware for optional shoulder strap attachment and heavy, lock-stitched nylon thread plus a...

Handcrafted all leather shoulder strap. Compliments our IronMouth™ carry bags and then some. Great for the seasoned traveler who wants an heirloom quality shoulder strap.Features adjustable shoulder pad and high quality swivel steel clips for ease of removal and movement. Detaches in seconds for storage inside your gear.Hand crafted from Bridle leather.1" wide strap adjusts from 45" long to 57.5" longMade in the USA

An industrial work of art. Handcrafted leather handle “molds” to your grip. This eight by fourteen inch tool carrier features 3 compartments with 45 pockets and tool holders. Innovative upright storage for quick access.The 5588 - Stronghold® Master Carpenter Case has a removable 5042 Clip on Tape pocket, 9501 - Clip-On Pouch, 2 Oxy™ Tool Shields 2003. A generous zipper bag on the side for driver bits, small items,etc., A holster for the rafter square. All leather main body for maximum quality...

Occidental Leather 8382 - Stronghold Rough Framer Tool Bag Lightweight all nylon two pouch tool bag with leather reinforced corners. Leather sleeve for clip-on tape or upper bag. Includes metal hammer holder. Specifications: Pockets & Tool Holders: 11Weight: 1.3 lbs.Main Bag: 8" x 8"Outer Bag: 5.5" x 6"Not available in left hand model. Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body....

Includes loop for flashlight, chain for electrical tape, quick release tool snap, heavy duty hammer holder, pockets for screw drivers and specialized tools. Tunnel loop on back accepts up to 3" work belt.Specifications:Pockets & Tool Holders: 15Weight: 1.2 lbs.Main Bag: 6.5" x 6"Made in the USA

All leather belt worn commercial electricians case with 25 pockets and tool holders that accommodate all your tools. Includes heavy duty chain for electrical tape and a handy utility clip. Designed exclusively for use by journeyman electricians. Black leather tool holders.Specifications:Pockets & Tool Holders: 25Weight: 2.0 lbs.Main Bag: 8" x 6.75" x 2.75"Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right...

Suspenders with Clip-On Gear Pockets allow you to carry all essentials and reach less. Specifications: Weight: 3.1 lbs. 7 pockets & Tool Holders. Dimensions: 17" x 7" x 3.5" O. A. Glasses Holder: 3" x 6" x 1.5" Pouch with closure: 5.5" x 4.5" Deep Made in ...

Tool & fastener organization in a vest, no belt, no bags. Unique patent pending design that adjusts to fit most sizes and leaves the back open for that much needed air flow!The Oxy™ Pro Work Vest is a great alternative system for all the trades and better than an apron. Intuitive pockets for speed square, gloves, tape measure, pencils, small notebooks, and a torpedo level!Great attention is paid to the details to insure years of hard wear. Stress points, edges and pockets are all reinforced...

The most pouches offered in the Leather Beltless Series. Includes the 5156 Cradle Hammer Holder on rear.Experience greater range of motion, balanced tool carrying capacity, and lower back relief through freedom from a tool belt. Sleeves on suspension system accept a wide variety of clip-on tool holders and accessories.Function Engineered For The Way You WorkEasy On And OffHand-Specific Tool PlacementEven Weight DistributionOne Size Fits Most** If you're over 6'2", you may need to add the...

The Occidental 2500 SuspendaVest has the flexibility to build your own "belt free" system using the bags of your choice. It is loaded with features and, has enough tool holders to do most jobs even without bags! Offered are 17 pockets and holders for all commonly used tools as well as plenty of extra storage for cell phone, note pads, calculator, etc. There are 3" wide belting sections that disconnect at the rear to accept bags that accommodate a 3" belt, this frees you to create a custom rig...

The 2550 is a complete tool system with the2500 SuspendaVest™ packaged with the 5060 (2 pouch fastener bag) and the 5017DB (3 pouch tool bag).Quick disconnect 3" wide leather belting accepts any tool bag with a tunnel loop up to 8.5" across. You may remove your bags from the SuspendaVest™ for finish work or work in tight spaces. Give your body a break, alternate with this belt free system.The SuspendaVest™ may be used for framing, electrical, concrete or trim applications. Fully adjustable...

The 2580 is a complete tool system with the 2500 SuspendaVest™ packaged with the patented* B8064 (4 pouch fastener bag) and the B8017DB (3 pouch tool bag).Quick disconnect 3" wide leather belting accepts any tool bag with a tunnel loop up to 8.5" across. You may remove your bags from the SuspendaVest™ for finish work or work in tight spaces. Give your body a break, alternate with this belt free system.The SuspendaVest™ may be used for framing, electrical, concrete or trim applications. Fully...

The Occidental Leather 9855 is a comfortable belt for production carpenters featuring our Fat Lip™ Bag Design - Ten inch deep industrial nylon bags with leather-reinforced bottom and corners. Features multiple tool holders and a 5020 2-in-1 Tool & Hammer Holder in the rear. The right bag includes a 2003 tool shield. The adjust-To-Fit™ system provides a full range of adjustment from pant waist size 32" to 41". Belt section is based upon our original leather buscadero design, but utilizing high...

Top of the line all leather bag Adjust-to-Fit™ set for the commercial electrician provides a full range of adjustment from pant waist size 32" to 40". Efficient, hand specific tool and fastener organization, function engineered. The leather NoSpill&Trade; tool holders form to your tools and give years of durable service. For the journeyman that requires the highest quality available.Tools Shown in Picture are not included.