Home >
Occidental Leather Tool Belts
Compare any other tool belt to an Occidental system. Instantly, you'll see and feel the difference. With 20 years of field tested designs, you can be assured that you're purchasing the most unique and hardest-working tool belt systems in the business.
Products 121-144 of 151
Show
Availability: In Stock
Item #: OCC-5018 -
most popular tool bag features holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax®.Specifications:Pockets & Tool Holders: 10Weight: 1.8 lbs.Main Bag: 9" x 8"Outer Bag: 5" x 5.5"Available for left hand builders with double outer bags 5018DBLHTool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body. ...
Availability: Out of Stock
Item #: OCC-B5018DB -
One of the most popular tool bags features double outer bags and holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax
Availability: In Stock
Item #: OCC-6102 -
Compact design is ideal for trim and finish work, but also suitable for light framing. Holders inside for pencil, work knife, lumber crayon, and chisel. Exterior tool snap clip and heavy duty hammer loop.Specifications:Pockets & Tool Holders: 9Weight: 1.4 lbs.Main Tool Bag: 8" x 7.5"Outer Bag: 6" x 5.5"Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...
Availability: Out of Stock
Item #: OCC-5526 -
Large, innovative, round bottom design provides room for tool holders and fasteners! Holders for torpedo level, pencils, utility knife, chisels, driver bits, etc. Comes stock with the 2003 - Oxy Tool Shield™.Specifications:Pockets & Tool Holders: 16Weight: 2.4 lbs.Main Bag: 10" x 9"Outer Bag: 5" x 5.5"Not available in left hand model.Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made...
Availability: In Stock
Item #: OCC-5062 -
Same features as 5060, plus an additional outer pouch. Specifications:Pockets & Tool Holders: 10 Weight: 2.1 lbs. Main Bag: 9" x 8" Middle Bag: 7" x 6" Outer Bag: 5.5" x 5.5" Upper Bag: 4.5" x 4.5" Also available for left hand builders as 5062LH Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.Made in the USA ...
Availability: In Stock
Item #: OCC-5061 -
Two pouch all leather bag features 9 pockets and tool holders.Specifications:Pockets & Tool Holders: 9Weight: 1.7 lbs.Main Bag: 9" x 8"Outer Bag: 7" x 5"Also available for left hand builders as 5061LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.Made in the USA
Availability: Out of Stock
Item #: OCC-5525 -
Large, innovative, round bottom design provides room for tool holders and fasteners! Holders for tri-square, cat’s paw, driver bits, angle square, tape pocket fits up to a 35’ tape. Comes stock with the very best in protection for tools, bags, and body; the 2003 - Oxy Tool Shield™.Specifications:Pockets & Tool Holders: 10Weight: 2.5 lbs.Main Bag: 11" x 9"Outer Bag: 8.5" x 6"Upper Bag: 4.5" x 4.5"Not available in left hand model.Fastener Bags hold the tools and fasteners most often accessed...
Availability: In Stock
Item #: OCC-6101 -
Compact design is ideal for trim and finish work but also suitable for light framing. Holders for 2 nail sets or driver bits, 1” blade square, cat’s paw sleeve. Angle square holster not included.Specifications:Pockets & Tool Holders: 8Weight: 1.5 lbs.Main Bag: 8" x 7.5"Outer Bag: 6" x 5"Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.Made in the USA ...
Availability: Out of Stock
Item #: OCC-B5060 -
The most popular leather fastener bag. Highly recommended for framing and general carpentry applications. Holders for 1” blade square, angle square, cat’s paw loop, driver bits, etc.Specifications:Pockets & Tool Holders: 9Weight: 1.9 lbs.Main Bag: 9" x 8"Outer Bag: 7" x 6"Upper Bag: 4.5" x 4.5"Also available for left hand builders as 5060LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and...
Availability: Out of Stock
Item #: OCC-B5611 -
Classic black all leather fastener bag! Offers side by side 35' tape holster and an upper bag; external sleeve pockets, drill bit holsters, angle square holster. Internal, 2003 - Oxy Tool Shield (included). Main bag features reinforced back wall at stress points to insure years of durable wear.
Availability: Out of Stock
Item #: OCC-5060 -
The most popular leather fastener bag. Highly recommended for framing and general carpentry applications. Holders for 1” blade square, angle square, cat’s paw loop, driver bits, etc.Specifications:Pockets & Tool Holders: 9Weight: 1.9 lbs.Main Bag: 9" x 8"Outer Bag: 7" x 6"Upper Bag: 4.5" x 4.5"Also available for left hand builders as 5060LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and...
Availability: In Stock
Item #: OCC-5595 -
Create your own beltless system. Go "Beltless" with any bags that accept a 3" belt. This set allows the use of any of Occidental's traditional bags to suit your custom needs.Includes the 5592 - Beltless Retro Tab and 5055 Suspenders *D-Ring is Not To Be Used As A Safety Connection!**The big & tall builder (over 6 2") may need the Suspender Extension kit #5044 for proper fit. ...
Availability: In Stock
Item #: OCC-1546 -
New, ultra-light industrial nylon suspension set features pockets at chest height for pencils or clip-on items (clip-on cases / clip-on bags). Extremely comfortable and even weight distribution. Heavy duty spring clips snap on and off with the direct connection kit (included). Comes complete with leather loops for use on up to 3” belts. Just slide onto your belt and get to work.**The big & tall builder (over 6 2") may need the Suspender Extension kit #5044 for proper fit. ...
Availability: In Stock
Item #: OCC-5009 -
Traditional heavy duty leather suspenders! Hand crafted from English Bridle leather, these " work horse" suspenders feature large shoulder pads. Heavy duty spring clips snap on and off your work belt with the direct connection kit (included). Fully adjustable, one size fits all. Leather loops are provided for slip-on use.Occidental Leather 5009 Work Suspenders**The big & tall builder (over 6 2") may need the Suspender Extension kit #5044 for proper fit. ...
Availability: In Stock
Item #: OCC-5592 -
Thi set is for those who already own our #5055 Stronghold Suspension System and wish to go Beltless with any bags that accept a 3” belt. This allows the use of any of our traditional bags to suit your custom needs. The 5592 is designed to be used only with the 5055 Stronghold Suspension System
Availability: In Stock
Item #: OCC-5055K -
This kit is used to attach your occidental suspenders directly to belts or to one piece assembly. Included in this package are directions and hardware for attaching the D rings to your belt or slip on leather loops.
Availability: In Stock
Item #: OCC-9008 -
High density neoprene cushion eliminates Tool Belt chafing and evenly distributes weight and pressure. Occidental Leather has taken the belt technology from their most comfortable Adjust-to-Fit systems and made it available for all belt worn belt systems.Light weight and easy to retrofit onto your existing belt set.Does not accommodate the following bags: B5611 and 5525 (found on the Black Builder and Big Oxy sets)
Availability: Out of Stock
Item #: OCC-5055 -
Extremely comfortable padded and contoured yoke relieves hips and lower back strain. This design keeps straps from wandering off your shoulders and distributes weight evenly. Yoke is lined with a special material that wicks away moisture. The leather loop attachment system for up to a 3" belt is included. Easy on & off, just release the adjustable chest strap and hang up your whole rig with the heavy duty “D” ring* provided in center of yoke. Even Load Distribution Exceptional Comfort Pockets...
Availability: In Stock
Item #: OCC-5044 -
For the extra big and tall builder, a pair of these straps provide an additional 10” to the length of your suspenders.For use on our 5009, and 5055 suspenders and suspension systems.Made in the USA
Availability: In Stock
Item #: OCC-5509 -
This kit of four pre-riveted D ring loops is available to attach your suspenders (model numbers 1546, 5009 & 5055) to additional belts for slip on attachment.
Availability: In Stock
Item #: OCC-9005 -
Great addition to your tool belt for extra lower back support. Will fit under a third bag or hammer holder!Very comfortable and supportive, high density foam pad with a polyethylene stiffener covered in industrial nylon.Made in the USA
Availability: Out of Stock
Item #: OCC-B5080DBLH -
Made for Left Handed people. For more than 30 years, the Pro Framer has been the benchmark by which all other tool belts have been measured. Designed by and for the professional builder, this traditional belt set is fine tuned for optimum efficiency and comfort. The Pro Leather Series is constructed of premium top grain cow hides tanned to our stringent specifications with a special blend of oils and waxes that meet the demands of heavy outdoor use. (Tools shown in...
Availability: Out of Stock
Item #: OCC-5080LH- -
This is a tool belt system for Left Handed people. For more than 30 years, the Pro Framer™ has been the benchmark by which all other tool belts have been measured. Designed by and for the professional builder, this traditional belt set is fine tuned for optimum efficiency and comfort. The Pro Leather Series is constructed of premium top grain cow hides tanned to stringent specifications with a special blend of oils and waxes that meet the demands of heavy outdoor use. ...
Availability: Out of Stock
Item #: OCC-8089LH -
This Left Handed Tool Belt System incorporates Leather and industrial nylon intelligently combined to lighten the builder\'s load. The NoSpill™ system features all leather, hand specific tool holders. FeaturesDesigned with Hand Specific Tool HoldersPadded Two Ply Tool Bags Keep Their ShapeExtremely Abrasion Resistant Industrial NylonLeather Tool Holders and Corner ReinforcingMade in USA!