Big Foot Tools

The Big Foot 10-1/4″ Worm Drive Beam Saw was designed by a professional tradesman with 27 years of practical, on-the-job, carpentry, framing and remodeling experience. While the Big Foot Saw was originally designed for cutting 2 plates in one pass, we quickly found it could also cut any 4x materials in one pass, just as easily. The Big Foot Saw will cut your 4x headers, double 2x sandwich headers, exposed beams for decks, porches, 4×4 fence posts and 7 sheets plus of 1/2″ Plywood with one...

Style 1 Kites are for all the older (2014 and Prior) 7-1/4” SKILSAW Model HD77, HD77M, SHD77, SHD77M and Bosch 1677M.The 10 1/4" Adapter Kit for the Skil and Bosh 7 1/4" worm-drive saws. The conversion kits are manufactured and sold separately from the saws. It takes approximately 15-30 minutes to install the Big Foot kit.It’s easy to see why the Big Foot 10-1/4″ SKILSAW® Adapter Kit–originally created for the Skil® and Craftsman® worm-drive saws—were such a hit.With a newly added short depth...

Style 2 Kits that fit the new and improved SKILSAW SPT77w, SPT77wm and SHD77-02 (2015 and Newer). The new Style 2 Kits have a new wider foot for better stability when cutting.The 10 1/4" Adapter Kit for the Skil 7 1/4" worm-drive saws. The conversion kits are manufactured and sold separately from the saws. It takes approximately 15-30 minutes to install the Big Foot kit.It’s easy to see why the Big Foot 10-1/4″ SKILSAW® Adapter Kit–originally created for the Skil® and Craftsman® worm-drive...

The Big Foot 75º Swing Table is custom-made in our shop for the Big Foot 10-1/4” Saw and allows you to cut full bearing rafters, beams, glu-lams, micro-lams and more. The Big Foot Swing Table is the only table for cutting the full bearing material needed for your 2×4 wall beams or your 2×6 wall beams, and is very easy and safe to use. Features of the 75 degree swing table include:Thumb lever assemblyEasy installation in two minutes or lessThe quadrant is marked from 0 to 75º so there is no...

The Big Foot 10-1/4" Thin Kerf 36 tooth carbide Blade designed for a framer by a framer. It now has it's own 10-1/4" 36 tooth carbide blade. This blade also has a diamond knockout center for other diamond center saws. This blade was designed and manufactured to meet our specifications by one of the worlds top saw blade manufacturers. We have had good reviews on these blades from carpenters that have used this blade.

Big Foots HeadCutter clamps to any gas-powered chain saw in seconds transforming it into a giant vertical cutting jigsaw. It is laterally angularly adjustable from vertical through 75 degree from vertical. It has a wide sturdy base plate, which fully supports the weight of the saw through its angular range and provides exception stability for accurate freehand cuts with the long cutting-bar. With the Headcutter the operator can easily guide the gas-powered chain saw to follow a snap-line or...

14" Saw Blade This blade is the thinnest of its size, and its light weight helps prolong the life of your saw’s motor. The perfect blade for your 14" Big Boy Saw!* Made from top quality carbide and high strength steel* 1” standard arbor* Spec. 14” 48 tooth Kerf .110

The Big Foot Pea Shooter is a must for any carpenter doing pick-up work on any frame job, either custom or production framing.The Big Foot Pea Shooter is capable of accessing difficult, narrow, tight spaces that are unreachable by a hammer or too high up to reach normally from the ground without a ladder.Thus, the Big Foot Pea Shooter eliminates the time-consuming and energy-sapping need to drag a ladder around the job site to address protruding nail heads. We all know that non-flush nail...

The Big Foot Pea Shooter is a must for any carpenter doing pick-up work on any frame job, either custom or production framing.The Big Foot Pea Shooter is capable of accessing difficult, narrow, tight spaces that are unreachable by a hammer or too high up to reach normally from the ground without a ladder.Thus, the Big Foot Pea Shooter eliminates the time-consuming and energy-sapping need to drag a ladder around the job site to address protruding nail heads. We all know that non-flush nail...