Syncnotcher

Introducing the Sync 180 JR Tube Notcher. The Sync 180 JR has the capability of notching 3/4" through 2-3/4" tubing. Solid construction for smooth accurate cutting. Able to do angle and offset notches, this quality notcher is the most versatile notcher at this price. Does not come with holesaws, you can order them here Includes Adjustable Quick Release handle ...

Introducing the Sync180  Tube Notcher. The Sync180 has the capability of notching 3/4" through 3" tubing. Solid construction for smooth accurate cutting. Able to do angle and offset notches, this quality notcher is the most versatile notcher at this price. This Tube Notcher Does not come with holesaws, you can order them hereIncludes Adjustable Quick Release handle ...

Make it a Package and Save! This notching package includes the most common hole saw and snap collar sizes for Roll Cage Fabrication. This Package Includes: SYNC180 Tube Notcher (3/4" to 3" capacity) SYNC Angle Bevel 6 Snap Collars: 1", 1-1/4, 1-1/2, 1-5/8, 1-3/4, & 2" 6 Hole Saws: 1", 1-1/4, 1-1/2, 1-5/8, 1-3/4, & 2" SYNC180 Tube Notcher Capacities: - Notch 3/4" to 3" Round Tubing - Notch 3/4" to 1 1/2" Square Tubing - Angles up to 60º – (swing angle total to 240º) - 180º quick locate jig-...

Make it a Package and Save! This notching package includes the most common hole saw and snap collar sizes for Roll Cage Fabrication. Package Includes SYNC180 Junior Tube Notcher  (Capacity 3/4" - 2-3/4") SYNC Angle Bevel 6 Snap Collars: 1", 1-1/4, 1-1/2, 1-5/8, 1-3/4, & 2" 6 Hole Saws: 1", 1-1/4, 1-1/2, 1-5/8, 1-3/4, & 2" ...

Now have the capability to notch into thin wall tubing, or notch short pieces of tube - without destroying the hole saw (or the tubing!) Before now it has been nearly impossible to notch thin wall tubing with any hole saw type notcher (unless you've taken the time and energy to make some means of support). ...

1" POLISHED SHAFT FOR SYNC 180 JR Tube Notcher

1" POLISHED SHAFT FOR SYNC 180 JR Tube Notcher (does not include adapters for hole saws)

1" POLISHED SHAFT FOR SYNC 180 JR Tube Notcher

Snap Collars simply snap onto the tube and can be rotated or slide into position during layup. They're a handy way to keep reference especially when rotating or flipping a tube around to make a second cut. Price Includes ONE Snap Collar ...

Snap Collars simply snap onto the tube and can be rotated or slide into position during layup. They're a handy way to keep reference especially when rotating or flipping a tube around to make a second cut. ...

Snap Collars simply snap onto the tube and can be rotated or slide into position during layup. They're a handy way to keep reference especially when rotating or flipping a tube around to make a second cut.

Snap Collars simply snap onto the Sch40 Pipe and can be rotated or slide into position during layup. They're a handy way to keep reference especially when rotating or flipping a Sch40 Pipe around to make a second cut.

Snap Collars simply snap onto the tube and can be rotated or slide into position during layup. They're a handy way to keep reference especially when rotating or flipping a tube around to make a second cut.

The Sync Bevel is a simple & practical tool to accurately match up the angle of two intersecting tubes to transfer the angle to a notcher. No more need to read degrees on a protractor.

This kit allows you to do offset notching and extend your SYNC tube notcher to 3" capacity

If you still struggle with marking centerline correctly try using a 'Centerline Finder'. You'll find that this handy tool will take the guesswork out of joining tube. How is a tube center finder used in notching? A basic notch starts with laying up the tube where you want the joint. Temporarily secure the tube so it can be marked and placed into the notcher. Position yourself to view both tubes at the intersection from a right angle perspective so you can accurately mark both the...

Package Includes the Following: Centerline Finder: If you still struggle with marking centerline correctly try using a 'Centerline Finder'. You'll find that this handy tool will take the guesswork out of joining tube. The Sync Bevel is a simple & practical tool to accurately match up the angle of two intersecting tubes to transfer the angle to a notcher. No more need to read degrees on a protractor. 6pc Snap Collar Locators: These tube notching accessories simply snap onto the tube and can be...

Arbor Adapter Kit for 5/8" and 1/2" hole saws