MetalPro Ironworker Accessories

Round Punch and Die Set for use with MetalPro Ironworkers

Round Punch and Die Set for use with MetalPro Ironworkers

Oblong (oval) Punch and Die Set for use with MetalPro Ironworkers

Round Punch and Die - Starter Set for MetalPro IronworkersIncludes the following sizes: 1/4", 3/8", 1/2", 5/8", 3/4"

Round Punch - Starter Set for MetalPro IronworkersIncludes the following sizes: 9/32"11/32"13/32"15/32"17/32"19/32"21/32" 23/32"

Round Punch - Starter Set for MetalPro IronworkersIncludes the following sizes:25/32"13/16"27/32"7/8"29/32"15/16"31/32"1"

Round Punch - Starter Set for MetalPro IronworkersIncludes the following sizes: 9/32"11/32"13/32"15/32"17/32"21/32"25/32"29/32"These sizes are 1/32" larger than the bolt size for alignment and clearance. This allows clearance holes for 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", and 7/8" bolts.

Heavy Duty Notcher for Metalpro Ironworkers Square Notches into 2" Angle IronPerfect solution for notching angle iron or making those time-consuming corners. Versatile attachment that expands the capabilities of any Metalpro Ironworker.

Standard Duty 1” x 3/4” Notcher for Metalpro Ironworkers Square Notches into 1" Angle Iron The MP4130 standard notcher accessory is designed for notching angle iron or flat bar. The MP4130 is specifically designed to fit into the punch station of all METALpro ironworkers. It takes a 1” x 3/4” notch out of material. A sturdy two part design allows for repeat cuts without any hassle. Made with precision machined tool steel.

MP4110  8" Brake with 3/16″ sheet metal die set for Metalpro Ironworkers METALpro’s 8” brake accessory fits in any METALpro Ironworkers central workstation. This accessory comes equipped with a standard 90 degree forming brake die set (10-gauge upper punch and 3/16” lower die). METALpro offers an assortment of die sizes and styles, capable of forming 28 gauge to ½” mild steel (width limited to tonnage requirements). All METALpro machines and accessories are proudly made in the...

MP4520  12" Brake with 3/16″ sheet metal die set.  For the 45Ton (MP4500FS) Metalpro Ironworker. Bend Capacity: 1/4" in. x 12" (mild steel) 3/8" in. x 6" (mild steel)

Metal Pro Ironworker Sch40 Pipe Notcher Housing. (dies are not included)The Metalpro Pipe Notch Housing can be used in the entire line of Metalpro Ironworkers. This attachment goes in the punch station of the ironworker and gets paired with one of our Pipe Notcher Dies (Sold Separately) to notch different sizes of pipes and Tubing.

These Dies are for notching Schedule 40 Pipe. For use with theMetalPro Pipe Notcher Housing.

6" Shearing Station for Metalpro 45Ton IronworkersCOUNTRY OF ORIGIN USACOMPATIBILITY Fits in all METALpro IronworkersFLAT BAR SHEAR THICKNESS CAPACITY 3/8"FLAT BAR SHEAR WIDTH CAPACITY 6"ANGLE IRON SHEAR CAPACITY 1/4" x 3" x 3"ROD SHEAR CAPACITY 3/4"SQUARE SHEAR CAPACITY 5/8"WEIGHT 54 lbs

8" Shearing Station for Metalpro 45Ton IronworkersCOUNTRY OF ORIGIN USACOMPATIBILITY Fits in all METALpro IronworkersFLAT BAR SHEAR THICKNESS CAPACITY 3/8"FLAT BAR SHEAR WIDTH CAPACITY 8"ANGLE IRON SHEAR CAPACITY 1/4" x 4" x 4"ROD SHEAR CAPACITY 3/4"SQUARE SHEAR CAPACITY 5/8"WEIGHT 84 lbs

12" Shearing Station for Metalpro 45Ton IronworkersCOUNTRY OF ORIGIN USACOMPATIBILITY Fits in all METALpro IronworkersFLAT BAR SHEAR THICKNESS CAPACITY 3/8"FLAT BAR SHEAR WIDTH CAPACITY 12"ANGLE IRON SHEAR CAPACITY 1/4" x 4" x 4"ROD SHEAR CAPACITY 3/4"SQUARE SHEAR CAPACITY 5/8"WEIGHT 101 lbs

Limit Switch Kit for Metal Pro 45 Ton IronWorkers. The MP45LS is a sensor controlled limit switch that automates your Metalpro Ironworker. The two sensors (one return sensor, and one stop sensor) reads the top and bottom of the arm. The sensors allow for micro adjustments for precise stroke control. This ensures the exact stroke height that you are looking for whether forming/bending, punching or shearing with your Metalpro ironworker. Punching/Shearing - Control your stroke height with just...