Tool and Fastener Bags

Compact design is ideal for trim and finish work but also suitable for light framing. Holders for 2 nail sets or driver bits, 1” blade square, cat’s paw sleeve. Angle square holster not included.Specifications:Pockets & Tool Holders: 8Weight: 1.5 lbs.Main Bag: 8" x 7.5"Outer Bag: 6" x 5"Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.Made in the USA ...

The most popular leather fastener bag. Highly recommended for framing and general carpentry applications. Holders for 1” blade square, angle square, cat’s paw loop, driver bits, etc.Specifications:Pockets & Tool Holders: 9Weight: 1.9 lbs.Main Bag: 9" x 8"Outer Bag: 7" x 6"Upper Bag: 4.5" x 4.5"Also available for left hand builders as 5060LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and...

The most popular tool bag design with all the features of the 5018DB without an extra outer pouch and tape pocket. Holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer.Specifications:Pockets & Tool Holders: 9Weight: 1.7 lbs.Main Bag: 9" x 8"Outer Bag: 5.5" x 5.5"Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...

Double outer bags and holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer.Specifications:Pockets & Tool Holders: 10Weight: 1.9 lbs.Main Bag: 9" x 8"Outer Bag: 5" x 5.5"Also available for left hand builders as 5017DBLHTool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...

most popular tool bag features holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax®.Specifications:Pockets & Tool Holders: 10Weight: 1.8 lbs.Main Bag: 9" x 8"Outer Bag: 5" x 5.5"Available for left hand builders with double outer bags 5018DBLHTool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body. ...

One of the most popular tool bags features double outer bags and holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax

All leather compact pouch. No tool holders. Great for that third bag in the back.Specifications:Weight: 0.7 lbs.Main Bag: 7.5" x 8"Made in the USA

Two pouch all leather bag without internal tool holders. For those who need a straight forward serviceable utility bag.Specifications:Weight: 1.3 lbs.Main Bag: 9" x 8"Outer Bag: 5.5" x 5.5"Made in the USA

Occidentals largest all leather bag. For those who need an extra large deep bag without tool holders. Specifications: Weight: 1.7 lbs.Main Bag: 10" x 10" Made in the USA

An all leather multi tool holder for Professional Electricians and Telecommunication specialists. Function engineered to provide superior organization and holders for specialty tools.14 pockets and tool holders plus a chain for tape and a quick release tool snap for keys, special wrenches, etc. There is a separate sleeve pocket in rear for wire ties etc.Specifications:Pockets & Tool Holders: 14 Weight: 1.0 lbs. Main Tool Bag: 6" x 6" Tool Bags hold the tools and fasteners most often accessed...

The most popular leather fastener bag. Highly recommended for framing and general carpentry applications. Holders for 1” blade square, angle square, cat’s paw loop, driver bits, etc.Specifications:Pockets & Tool Holders: 9Weight: 1.9 lbs.Main Bag: 9" x 8"Outer Bag: 7" x 6"Upper Bag: 4.5" x 4.5"Also available for left hand builders as 5060LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and...

Two pouch all leather bag features 9 pockets and tool holders.Specifications:Pockets & Tool Holders: 9Weight: 1.7 lbs.Main Bag: 9" x 8"Outer Bag: 7" x 5"Also available for left hand builders as 5061LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.Made in the USA

Same features as 5060, plus an additional outer pouch. Specifications:Pockets & Tool Holders: 10 Weight: 2.1 lbs. Main Bag: 9" x 8" Middle Bag: 7" x 6" Outer Bag: 5.5" x 5.5" Upper Bag: 4.5" x 4.5" Also available for left hand builders as 5062LH Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.Made in the USA ...

Large style, all leather pouch. Suitable for both lathers and drywall pros. Exceptional tool organization and durability. Holders for circle cutter, metal snips, saw, knife, Surform®, pencils.Specifications:Pockets & Tool Holders: 11Weight: 1.4 lbs.Main Bag: 8" x 6"Tool Bags hold the tools and fasteners most often accessed with the right hand and are worn on the right side of the body.Made in USA!

This high quality, 8-oz. top grain leather case is truly a work of industrial art! Features internal and external tool organization with 17 pockets and tool holders.Case is divided inside for maximum organization and holds the screwdrivers, markers, strippers, pliers, utility knife, chisels, torpedo level, hammer. Comes with quick release tool snap, strap for electrical tape. Also holster for 35’ 1” blade tape.Specifications:Pockets & Tool Holders: 17Weight: 2.1 lbs.Main Bag: 11" x 7"Made in...

Large, innovative, round bottom design provides room for tool holders and fasteners! Holders for tri-square, cat’s paw, driver bits, angle square, tape pocket fits up to a 35’ tape. Comes stock with the very best in protection for tools, bags, and body; the 2003 - Oxy Tool Shield™.Specifications:Pockets & Tool Holders: 10Weight: 2.5 lbs.Main Bag: 11" x 9"Outer Bag: 8.5" x 6"Upper Bag: 4.5" x 4.5"Not available in left hand model.Fastener Bags hold the tools and fasteners most often accessed...

Large, innovative, round bottom design provides room for tool holders and fasteners! Holders for torpedo level, pencils, utility knife, chisels, driver bits, etc. Comes stock with the 2003 - Oxy Tool Shield™.Specifications:Pockets & Tool Holders: 16Weight: 2.4 lbs.Main Bag: 10" x 9"Outer Bag: 5" x 5.5"Not available in left hand model.Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made...

Compact design is ideal for trim and finish work, but also suitable for light framing. Holders inside for pencil, work knife, lumber crayon, and chisel. Exterior tool snap clip and heavy duty hammer loop.Specifications:Pockets & Tool Holders: 9Weight: 1.4 lbs.Main Tool Bag: 8" x 7.5"Outer Bag: 6" x 5.5"Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...

Oxy Lights™ tool bag with holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer.Specifications:Pockets & Tool Holders: 9Weight: 1.2 lbs.Main Bag: 9" x 8"Outer Bag: 6.5" x 5.5"Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA

most popular OxyLights™ tool bag. Holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax®.Specifications:Pockets & Tool Holders: 10Weight: 1.3 lbs.Main Tool Bag: 9" x 8"Outer Bag: 5" x 5.5"Not available in left hand model.Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...

most popular OxyLights™ tool bag. Holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax®.Specifications:Pockets & Tool Holders: 10Weight: 1.3 lbs.Main Tool Bag: 9" x 8"Outer Bag: 5" x 5.5"Not available in left hand model.Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...

Three pouch nylon/leather combo bag features 9 pockets & tool holders. Main bag - 10"W X 8"D. Outer bag - 7"W X 51/2"D. Upper bag - 51/2"W X 4"D. Highly recommended for framing and general carpentry applications.

This fastener bag is for left handed people. Left-Handed Model means 'for Left-handed People' and not to be confused with 'Left-sided'. A common mistake is to order a Left-handed fastener bag and assume that it is to be worn on the left side. A Left Handed fastener bag is worn on the right Three pouch nylon/leather combo bag features 9 pockets & tool holders. Main bag - 10"W X 8"D. Outer bag - 7"W X 51/2"D. Upper bag - 51/2"W X 4"D. Highly recommended for framing and general carpentry...

Specifications:Pockets & Tool Holders: 10Weight: 1.3 lbs.Main Bag: 9" x 8"Middle Bag: 8" x 6"Outer Bag: 5.5" x 5.5"Upper Bag: 4.5" x 4.5"Also available for left hand builders as 8062LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.Made in the USA ...

These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip™ bag mouth. The leather FatLip™ keeps the bag formed, open, and protected against abrasion.Unique patented* 2-in-1 outer bag with angle square holster between main and outer bag, 4 bags total. Also has a tri-square sleeve, cat’s paw loop and external nail set or driver bit pouches.Specifications:Pockets & Tool Holders: 10Weight: 1.7 lbs.Main Bag: 10" x 10"Outer Bag: 9" x 6"Upper Bag: 5" x 4.5"Not...

These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip™ bag mouth. The leather FatLip™ keeps the bag formed, open, and protected against abrasion.Specifications:Pockets & Tool Holders: 13Weight: 1.9 lbs.Main Tool Bag: 10" x 10"Outer Bag: 6.5" x 5.5"Not available in left hand model.Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...

These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip™ bag mouth. The leather FatLip™ keeps the bag formed, open, and protected against abrasion.Unique patented* 2-in-1 outer bag with angle square holster between main and outer bag, 4 bags total. Also has a tri-square sleeve, cat’s paw loop and external nail set or driver bit pouches.Specifications:Pockets & Tool Holders: 10Weight: 1.7 lbs.Main Bag: 10" x 10"Outer Bag: 9" x 6"Upper Bag: 5" x 4.5"Not...

These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip™ bag mouth. The leather FatLip™ keeps the bag formed, open, and protected against abrasion.Specifications:Pockets & Tool Holders: 13Weight: 1.9 lbs.Main Tool Bag: 10" x 10"Outer Bag: 6.5" x 5.5"Not available in left hand model.Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Made in the USA ...

A case designed strictly for tool organization! Equipped with 2, 2003 - Oxy Tool Shield™, 18 pockets and tool holders total. Leather lined inside all along the bottom. Four interior walls. Ideal for the master finish carpenter or plant engineers!Specifications:Pockets & Tool Holders: 18Weight: 1.7 lbs.Main Bag: 9" x 8"Outer Bag: 5.5" x 5.5"Not available in left hand model. ...

Cost efficient fastener management! Single clip-on bags make it easy to switch to different applications. Keep them fully loaded and neatly lined up in your truck or clipped to your toolbox when not in use. Also can be used to add fastener storage or sub divide existing main bags.The Clip-On only fits up to a 2 inch WorkbeltSpecifications:Dimensions: 5" x 4.5" Weight: 0.3 lbs. Made in the USA ...

One extra bag not enough? Get the double clip-on pouch with leather clip-on patch for cell phone, etc. Cost efficient fastener management! Keep them fully loaded and neatly lined up in your truck or clipped to your toolbox when not in use. Also can be used to add fastener storage or sub divide existing main bags.The Clip-On only fits up to a 2 inch WorkbeltSpecifications:Main Bag: 5" x 7" Outer Bag: 5" x 5.5" Weight: 0.5 lbs. Made in the USA ...

Cost efficient fastener management with an angle square holster! Single clip-on larger capacity bag. Perfect for small jobs or the do it yourself weekend projects.Specifications:Main Bag: 7.5" x 6" Weight: 0.4 lbs. Made in USA!

Cost efficient fastener management! Single clip-on bags make it easy to switch to different applications. Keep them fully loaded and neatly lined up in your truck or clipped to your toolbox when not in use. Slightly deeper and narrower than the 9501. The Clip-On only fits up to a 2 inch Workbelt Specifications: Dimensions: 5"w x 6"h x 3"d Weight: 0.25 lbs. Made in the USA ...

Compact light weight bag design is ideal for trim, framing and finish work. Innovative, round-bottom nylon main and outer bags.Holders include a speed square inside or out and, features the patented* 2-in-1 outer bag for maximum fastener capacity in a compact space. Comes stock with the 2003 - Oxy Tool Shield™.Specifications:Pockets & Tool Holders: 11Weight: 1.0 lbs.Main Bag: 9.5" x 7.5"Outer Bag: 9" x 6"Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail...

Compact bag design is ideal for trim, light framing and finish work. Innovative, round-bottom, full capacity, two-ply foam core main and outer bags hold their shape empty or loaded. Clip on leather tab for tape or upper bag, driver bit or nail set pouches included, metal hammer holder. Comes stock with the 2003 - Oxy Tool Shield™.Specifications:Pockets & Tool Holders: 12Weight: 1.0 lbs.Main Bag: 9.5" x 7.5"Outer Bag: 6.5" x 5.5"Left handed model available as 9521LHTool Bags hold the tools most...

Pro Leather™ construction bolt bag with bull-pin loop on each side. Tunnel loop on back accepts up to 3" work belt.Specifications:Pockets & Tool Holders: 3Weight: 1.3 lbs.Main Bag: 9" x 8.5"

One of the most popular tool bags features double outer bags and holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax

Classic black all leather fastener bag! Offers side by side 35' tape holster and an upper bag; external sleeve pockets, drill bit holsters, angle square holster. Internal, 2003 - Oxy Tool Shield (included). Main bag features reinforced back wall at stress points to insure years of durable wear.

Classic black all leather tool bag! Offers external leather hammer holder, double outer bags; internal storage includes one 2003 - Oxy Tool Shield , pockets for level, chisel, drill bits, knife, pencils and lumber crayon. Main bags feature reinforced back wall at stress points to insure years of durable wear.

This tool bag features holders for pencils, work knife, chisel, level, lumber crayon, plus a heavy duty hammer loop. Main tool bag corners are reinforced with our trademark OxyRed™ leather.Specifications:Pockets & Tool Holders: 10Weight: 1.3 lbs.Main Tool Bag: 9" x 8"Outer Bag: 5" x 5.5"Also available for left hand builders as B8017DBLHTool Bags hold the tools most often accessed with the right hand and are worn on the right side of the body.Made in USA! ...

Three pouch nylon/leather combo bag featuring 11 pockets and tool holders. The double outer bags give you more room for organization. Main bag - 10"W x 8"D. Outer bag - 6"W x 5"D.

Three pouch nylon/leather combo bag features 9 pockets & tool holders. Main bag - 10"W X 8"D. Outer bag - 7"W X 51/2"D. Upper bag - 51/2"W X 4"D. Highly recommended for framing and general carpentry applications.

Unique patented* 2-in-1 outer bag with angle square holster between main and outer bag, 4 bags total. Also has a tri-square sleeve, cat’s paw loop and external nail set or driver bit pouches.Specifications:Pockets & Tool Holders: 10Weight: 1.7 lbs.Main Bag: 9" x 8"Outer Bag: 8" x 6"Upper Bag: 4.5" x 4.5"Also available for left hand builders as B8064LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square,...

Straightforward compact bag ideal as that third bag or for small jobs. Single pouch design with padded, double wall Industrial Nylon construction.Specifications:Weight: 0.4 lbs.Main Bag: 8" x 9"Made in the USA

Occidental Leather 8382 - Stronghold Rough Framer Tool Bag Lightweight all nylon two pouch tool bag with leather reinforced corners. Leather sleeve for clip-on tape or upper bag. Includes metal hammer holder. Specifications: Pockets & Tool Holders: 11Weight: 1.3 lbs.Main Bag: 8" x 8"Outer Bag: 5.5" x 6"Not available in left hand model. Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body....